LANPWR 24V 1080Wp (12 x 180Wp) Complete MPPT Off Grid Solar Kit

A: No, LANPWR 12V 300Ah LiFePO4 batteries are deep cycle batteries and are not suitable for starting engines or devices. Deep cycle batteries are designed to provide a steady, continuous power output over long periods, not the high bursts of energy required for starting engines.

If you need a battery specifically for starting applications, we recommend our Sodium-Ion Starting Batteries, which are designed to deliver the high cranking amps needed for reliable engine starts.

A: Yes, LiFePO4 (Lithium Iron Phosphate) is one of the safest and most stable lithium-based chemistries available. LANPWR 12V 300Ah LiFePO4 batteries are designed with safety in mind and meet high safety standards.

Each LANPWR LiFePO4 battery is equipped with an internal Battery Management System (BMS) that offers multiple protection features, including:

• Under-voltage protection during discharge
• Over-voltage protection during charging
• Over-current protection during discharge
• Over-temperature protection during charge and discharge
• Short-circuit protection to prevent damage to the battery cells
  

Additionally, LANPWR LiFePO4 batteries are rigorously tested to minimize risks, such as fire hazards and electric shock, even in harsh environments.

A: The runtime of a LANPWR 300Ah battery depends entirely on the specific appliances you're powering. With a solid 3840Wh capacity, here are some typical examples of what you can expect:

Low-Power Appliances (Extended Use):

• Fan (40W): Up to approximately 96 hours
• Fridge (50W): Up to approximately 76 hours
• TV (100W): Up to approximately 38 hours

High-Power Appliances (Short-Term Use):

• Washing Machine (500W): Up to approximately 7.7 hours
• Microwave (1000W): Up to approximately 3.8 hours
• Air Conditioner (1100W): Up to approximately 3.4 hours
  

This makes the LANPWR 300Ah battery a versatile power solution, suitable for everything from daily use to emergency backup.

A: For the LANPWR 12V 300Ah LiFePO4 battery, it is recommended to charge the battery only when the temperature is above 32°F (0°C). Charging in freezing temperatures can potentially damage the cells. On colder days, the best practice is to bring the battery indoors to charge.

For Charging in Freezing Temperatures:

If your application requires charging in sub-zero conditions (e.g., winter RVing or off-grid cabins), we recommend considering our LANPWR Cold Weather Batteries. These advanced models are equipped with a low-temperature charging protection system, which automatically manages charging in cold environments, helping to protect your battery investment.

A: Yes, LANPWR 12V 300Ah deep cycle lithium batteries can be connected 4 in series to create a 48 volt battery system.

Important Notes for Series or Parallel Connections:

To ensure optimal performance and safety when connecting batteries in series or parallel, the following conditions should be met:

a. The batteries should be identical in terms of capacity (Ah) and Battery Management System (BMS) specifications (A).

b. Batteries should be from the same brand, as lithium batteries from different manufacturers may have different BMS configurations.

c. Ideally, the batteries should be purchased within a similar timeframe (preferably within one month) to ensure uniformity in performance.

A: To ensure optimal longevity and performance, store your LANPWR 300Ah LiFePO4 batteries under the following conditions:

Storage Recommendations:

• State of Charge (SOC): It is recommended to store the batteries at around 50% state of charge. Avoid storing them either fully charged or completely discharged.
• Regular Recharging: If you plan to store the batteries for an extended period, recharge them to 50% at least every three months to prevent deep discharge and maintain the balance of the cells.
• Temperature: The ideal storage temperature range is between -10°C to 50°C (14°F to 122°F).
• Humidity: The relative humidity should be maintained between 5% and 95%.
• Protective Casing: Consider storing the batteries in a dedicated battery box to protect them from physical damage, dust, and moisture.
  

Best Practices for Long-Term Storage:

For storage periods exceeding three months, following these guidelines can help preserve the health and performance of your battery:

• Disconnect Completely: Ensure the batteries are disconnected from all loads and charging sources. This prevents slow parasitic drains that can lead to over-discharge.
• Avoid Extreme Temperatures: Storing batteries outside the recommended temperature range can speed up degradation. In particular, high heat can negatively affect the battery’s capacity.
• Cycle Before Use: After long-term storage, it’s a good practice to perform a full charge and discharge cycle before putting the battery back into regular use.

A: Yes, you can charge LANPWR LiFePO4 lithium batteries using solar panels. To ensure efficient charging, it is important to size your charge controller according to the voltage and current output of your solar array setup. This helps ensure that the charge controller can effectively regulate and manage the power coming from the solar panels.

A: The LANPWR 12V 300Ah LiFePO4 lithium battery can be charged in several ways. Here are the most common methods:

1. Using Solar Panels + Solar Charge Controller

You can fully charge the battery using solar panels. With 900W panels, it typically takes one day (assuming 4.5 hours of effective sunlight). If you use panels rated at ≥900W, charging time may vary depending on the sunlight duration and intensity.

2. Using a Generator/Alternator

If your generator or alternator has a DC output, you’ll need a DC-to-DC charger to connect the battery. If it has an AC output, use a compatible AC-to-DC charger.

• Recommended Charging Voltage: 14.2V - 14.6V
• Charging Current Options:
  20A (0.07C): The battery will be fully charged in about 15 hours.
  40A (0.13C): The battery will be fully charged in about 7.5 hours.
  60A (0.2C): The battery will be fully charged in about 5 hours.

3. Using LiFePO4 Smart Chargers

For optimal performance, use a charger specifically designed for LiFePO4 batteries.

• Recommended Charging Voltage: 14.2V - 14.6V
• Charging Current Options:
  20A (0.07C): Full charge takes about 15 hours.
  40A (0.13C): Full charge takes about 7.5 hours.
  60A (0.2C): Full charge takes about 5 hours.
  

You can also use a 14.6V 10A or 14.6V 50A charger:

• 14.6V 10A charger: Full charge in 30 hours.
• 14.6V 50A charger: Full charge in 6 hours.
  

Additional Notes:

• The charging time will always depend on factors like solar conditions, temperature, and charging current.
• Regularly check the battery's state of charge (SOC) to avoid overcharging or undercharging, both of which can reduce the battery's lifespan.